Mahogany Arch Top Mantel Clock Strike   |    Ref: CL-C4302S

Related products:

1. Mahogany Arch Top Mantel Clock Quartz (Ref: CL-C4302Q)

A classic solid mahogany arch top case clock.

The strike mechanism sounds once on the half hour and the number indicated by the hour hand on the hour. Once wound it will run for a period greater than 8 days. This stirke mechanism boasts an automatic strike sequence correction.

Each clock comes with enamel finished dials with convex glass. Fine period hands and lacquered brass fittings complete the classic look for this stylish clock.

Dimensions:
Height 8.5” (215mm)
Width 6.75” (170mm)
Depth 3.5” (90mm)

Each item is delivered with a 12 months warranty card. The quartz clock includes a support card signed by the person who made the final inspection of your clock.

For the stike mechanism:
Full instructions are included with the clock. The following indicates the set-up and maintanence required.
A striking clock needs to be set in the following way:
• Fully wind each keyhole clockwise weekly. Each spring should be wound until a definite resistance is felt. It is not possible to over-wind the mechanism under normal use. Fully wound, the clock will run for a period greater than 8 days.
• To syncronise the clock mechanism move the minute hand clockwise as required. Allow the clock to run for 1 hour. If the number struck does not match the hour indicated, push the hour hand to the correct position.
• Set the time by moving the minute hand clockwise until the minute and hour hand read correct time. The clock will strike once on the half hour and the number indicated by the hour hand on the hour.

NB. This item may ship direct from the manufacturer and take a few extra days to be delivered. We will inform you of the expected shipment date.