Category » Technoline / La Crosse Technology

There were 11 questions found in this category:

1. Remote Sensor Transmission and Reception
   If your station stops receiving the outdoor sensors this may be for one of several reasons such as low batteries and on occasions electrical disturbance. If it is the batteries (as often happens to outdoor sensors with the onset of cold weather) consider that it could be either the outdoor sen ...
2. My Clock is 1 hour ahead - Why?
   Certain products receive their clock signal from DCF at Frankfurt in Germany. These models have a time zone function allowing the user to select an offset from Central European Time. For example in the UK the time zone would be -1. If your clock keeps showing an hour ahead then you have not set ...
3. WS300 / WS250 Setting Longitude and Latitude
   Here is how to set up these values for everyone west of the Greenwich Meridian. To find out your correct latitude and longitude log on to www.multimap.com and enter your post code and you will be given your location as a decimal. For example a location that has the latitude of 52.53 and a long ...
4. WS1600 / WS2300 / WS2350 Sensor Setup
   The temperature and humidity sensor acts as the transmitter. The rain gauge and wind sensor are cabled into the transmitter. You need to pull / lift the cover off the transmitter to reveal the sockets for the cables. The sockets are individually labeled so ensure that you plug the correct lead, ...
5. Serial / USB Connections
   Most electronic weather stations that can be connected to a PC, output "serial" data. It is probably for this reason that many manufacturers have been slow to move over to USB connections. Furthermore most quality PCs still have at least one serial (com) port and it is usually only laptops and ...
6. The Importance of Batteries
   Batteries are an essential part of the function of a Wireless Weather Station. If you are having problems receiving data / there are dashes showing on your main console the first thing to check is the battery condition in ALL indoor and outdoor units. It is especially important to do this as win ...
7. Accurate measurement of rainfall
   The accurate measurement of the amount of rain that falls in a set period of time is a challenge that has defied meteorologists ever since the first rain gauges were developed in the 1650’s. Early gauges, as long as three millennia ago, were simply bowls left out in rain to see and com ...
8. How do I change the wind unit measurement on my WS9035
   To change the units used to measure the wind reading on the Technoline / Lacrosse WS9035 from M/S to either KPH or MPH use the buttons at the bottom of the WS9035 console (Indoor unit) and carry out the following instructions. Press and hold the "Set" button while at the same time briefly and c ...
9. How do I set-up a WS8610?
   These models can be a little frustrating to set up and it is easy to get out of sync in the process. Please try the following:- 1) Remove all batteries, wait 5 minutes before re-inserting them into the O/D sensor followed quickly by the console and keep them at least 6-8 foot apart. 2) Press and ...
10. Installing Weather Display
    WeatherDisplayLite This is a free 'feature light' version of the main Weather Display programme. To obtain WeatherDisplayLite (WD Lite) please use the following link; http://www.weather-display.com/downloadfiles/aprslitesetup.exe After installing the programme you may need to configure the Weat ...
11. USB Drivers for FTDI USB / Serial Converters
    If you are having problems with a USB adapter with an FTDI chip, such as the ones supplied with WS2300 and WMR928 weather stations, the latest drivers are available from; www.ftdichip.com/Drivers/VCP.htm